Welcome to A.S. Raymond Asia

Online Store

Shopping Cart

Help

SPRING LOOPING TOOL

Loops springs from 1/8" to 1/2" O.D.

Catalog Number H1

Used to make cross over loops on continuous length extension springs up to 1/2" outside diameter and up to .062" diameter wire. In addition, two forming punches are provided with tool.

Spring Looping Tool

Stock Round Wire Compression Springs Open Ends - 10" Long - Hard Drawn or Music Wire
Page 1 of 1
CATALOG NUMBER	Hole Size *	Wire Size	Spring Rate Lb./Inch	Approx. Solid Height	Minimum Order
C093-010-10-L	0.093	0.01	0.12	2.8	12
C093-014-10-L	0.093	0.014	0.5	3.99	12
C125-012-10-L	0.125	0.012	0.11	3	12
C125-016-10-L	0.125	0.016	0.38	4	12
C188-014-10-L	0.188	0.014	0.08	1.96	12
C188-018-10-L	0.188	0.018	0.26	2.52	12
C188-026-10-L	0.188	0.026	1.39	3.38	12
C188-035-10-L	0.188	0.035	3.84	6.65	12
C250-018-10-L	0.25	0.018	0.14	1.71	12
C250-022-10-L	0.25	0.022	0.26	2.53	12
C250-026-10-L	0.25	0.026	0.69	2.47	12
C250-031-10-L	0.25	0.031	1.46	3.1	12
C250-035-10-L	0.25	0.035	1.82	4.55	12
C250-041-10-L	0.25	0.041	5.83	3.69	12
C250-047-10-L	0.25	0.047	9.35	4.7	12
C312-022-10-L	0.312	0.022	0.15	2.2	12
C312-031-10-L	0.312	0.031	0.63	3.41	12
C312-037-10-L	0.312	0.037	1.35	4.07	12
C312-041-10-L	0.312	0.041	2.88	3.28	12
C312-047-10-L	0.312	0.047	6.06	3.53	12
C312-055-10-L	0.312	0.055	11.45	4.4	12
C375-031-10-L	0.375	0.031	0.33	3.41	12
C375-035-10-L	0.375	0.035	0.61	3.5	12
C375-043-10-L	0.375	0.043	2.19	3.01	12
C375-047-10-L	0.375	0.047	2.67	4	12
C375-055-10-L	0.375	0.055	7.03	3.3	12
C375-062-10-L	0.375	0.062	12.36	4.03	12
C375-075-10-L	0.375	0.075	27.77	5.25	12
C438-035-10-L	0.438	0.035	0.54	2.45	12
C438-047-10-L	0.438	0.047	1.87	3.29	12
C438-055-10-L	0.438	0.055	4.49	3.3	12
C438-062-10-L	0.438	0.062	6.9	4.03	12
C438-075-10-L	0.438	0.075	19.81	4.13	12
C438-085-10-L	0.438	0.085	31.15	5.1	12
C500-035-10-L	0.5	0.035	0.25	3.15	12
C500-047-10-L	0.5	0.047	1.1	3.53	12
C500-055-10-L	0.5	0.055	2.33	3.85	12
C500-062-10-L	0.5	0.062	7.11	2.4	12
C500-075-10-L	0.5	0.075	15.03	3.38	12
C500-091-10-L	0.5	0.091	32.54	4.55	12
C500-115-10-L	0.5	0.115	91.47	6.33	12
* Hole size refers to the diameter of the hole that the spring can be inserted.
Page 1 of 1
Stock Round Wire Compression Springs Open Ends - 10" Long - Hard Drawn or Music Wire

Stock Round Wire Compression Springs Open Ends - 18" Long - Hard Drawn or Music Wire
Page 1 of 1
CATALOG NUMBER	Hole Size *	Wire Size	Spring Rate Lb./Inch	Approx. Solid Height	Minimum Order
C500-041-18-L	0.5	0.041	0.61	3.32	12
C500-054-18-L	0.5	0.054	2.32	3.89	12
C562-062-18-L	0.562	0.062	1.86	6.42	12
C562-072-18-L	0.562	0.072	5.3	5.18	12
C625-054-18-L	0.625	0.054	1.42	2.92	12
C688-062-18-L	0.688	0.062	1.87	3.35	12
C688-068-18-L	0.688	0.068	2.26	4.28	12
C688-072-18-L	0.688	0.072	3.17	4.21	12
C812-062-18-L	0.812	0.062	1.25	2.79	12
C812-080-18-L	0.812	0.08	3.85	3.6	12
C875-098-18-L	0.875	0.098	7.95	3.97	12
C938-080-18-L	0.938	0.08	2.32	3.53	12
C938-125-18-L	0.938	0.125	14.52	6.19	12
C1000-098-18-L	1	0.098	5.72	3.44	12
C1062-085-18-L	1.062	0.085	2.21	7.29	12
C1062-125-18-L	1.062	0.125	13.61	4.5	12
C1125-125-18-L	1.125	0.125	7.89	3.6	12
C1125-135-18-L	1.125	0.135	9.98	6.19	12
C1188-090-18-L	1.188	0.09	2.77	2.84	12
C1188-125-18-L	1.188	0.125	9.1	4.5	12
C1375-148-18-L	1.375	0.148	12.83	4.46	12
C1625-148-18-L	1.625	0.148	8.09	3.99	12
C1875-148-18-L	1.875	0.148	4.66	4.66	12
* Hole size refers to the diameter of the hole that the spring can be inserted.
Page 1 of 1
Stock Round Wire Compression Springs Open Ends - 18" Long - Hard Drawn or Music Wire

Stock Continuous Length Extension Springs 20" Lengths Without Loops - Stainless Steel
Page 1 of 1
CATALOG NUMBER	Outside Diameter		Wire Diameter		Approx. Number of Coils Per Inch	K
CATALOG NUMBER	in	mm	in	mm	Approx. Number of Coils Per Inch	K
E0125-013-CS	0.125	3.175	0.013	0.33	76	25
E0125-017-CS	0.125	3.175	0.017	0.43	57.5	83
E0187-015-CS	0.187	4.75	0.015	0.38	66.5	12
E0187-020-CS	0.187	4.75	0.02	0.51	49	43
E0187-026-CS	0.187	4.75	0.026	0.66	38.5	137
E0250-017-CS	0.25	6.35	0.017	0.43	57.5	8
E0250-020-CS	0.25	6.35	0.02	0.51	49	16
E0250-032-CS	0.25	6.35	0.032	0.81	31.5	131
E0312-020-CS	0.312	7.925	0.02	0.51	49	8
E0312-026-CS	0.312	7.925	0.026	0.66	38.5	24
E0312-032-CS	0.312	7.925	0.032	0.81	31.5	59
E0312-041-CS	0.312	7.925	0.041	1.04	24	176
E0375-032-CS	0.375	9.525	0.032	0.81	31.5	32
E0375-041-CS	0.375	9.525	0.041	1.04	24	95
E0375-054-CS	0.375	9.525	0.054	1.37	18.5	321
E0438-041-CS	0.438	11.125	0.041	1.04	24	57
E0438-054-CS	0.438	11.125	0.054	1.37	18.5	188
E0500-054-CS	0.5	12.7	0.054	1.37	18.5	120
E0500-072-CS	0.5	12.7	0.072	1.83	14	428
E0562-072-CS	0.562	14.275	0.072	1.83	14	286
E0562-091-CS	0.562	14.275	0.091	2.31	10.5	820
E0625-072-CS	0.625	15.875	0.072	1.83	14	199
E0625-091-CS	0.625	15.875	0.091	2.31	10.5	563
E0750-091-CS	0.75	19.05	0.091	2.31	10.5	300
Page 1 of 1
Stock Continuous Length Extension Springs 20" Lengths Without Loops - Stainless Steel

Stock Continuous Length Extension Springs 20" Lengths - Hard Drawn
Page 1 of 1
CATALOG NUMBER	Outside Diameter		Wire Diameter		Approx. Number of Coils Per Inch	K
CATALOG NUMBER	in	mm	in	mm	Approx. Number of Coils Per Inch	K
E0125-017-CH	0.125	3.175	0.016	0.41	61.5	73
E0125-023-CH	0.125	3.175	0.023	0.58	43.5	379
E0187-023-CH	0.187	4.75	0.023	0.58	43.5	91
E0187-028-CH	0.187	4.75	0.028	0.71	36	220
E0250-028-CH	0.25	6.35	0.028	0.71	36	81
E0250-035-CH	0.25	6.35	0.035	0.89	30	217
E0312-035-CH	0.312	7.925	0.035	0.89	30	101
E0312-047-CH	0.312	7.925	0.047	1.19	21	395
E0375-035-CH	0.375	9.525	0.035	0.89	30	55
E0375-047-CH	0.375	9.525	0.047	1.19	21	208
E0438-035-CH	0.438	11.125	0.035	0.89	30	33
E0438-047-CH	0.438	11.125	0.047	1.19	21	123
E0500-047-CH	0.5	12.7	0.047	1.83	21	79
E0500-072-CH	0.5	12.7	0.072	1.83	14	493
E0562-063-CH	0.562	14.275	0.063	1.6	16	128
E0625-080-CH	0.625	15.875	0.08	2.03	12.5	380
E0750-105-CH	0.75	19.05	0.105	2.67	9.5	651
E0875-105-CH	0.875	22.225	0.105	2.67	9.5	383
E1000-092-CH	1	25.4	0.092	2.34	10.5	138
E1000-120-CH	1	25.4	0.12	3.05	8.5	446
E1125-135-CH	1.125	28.575	0.135	3.43	8	492
Page 1 of 1
Stock Continuous Length Extension Springs 20" Lengths - Hard Drawn